Fusion Curing Lights

Ultimate Quality Dental Equipment

Fusion Dental Curing Lights have been developed to provide the best in quality for today's busy professional dental practitioner. 

Fusion 4.0 Curing Light
Fusion 4.0 Curing Light

The most versatile and powerful curing light

Fusion 4 Ortho Curing Light
Fusion 4 Ortho Curing Light

4 Seconds bonding of metal brackets

Fusion S7 Curing Light
Fusion S7 Curing Light

High performance at low cost!

Fusion Accessories
Fusion Accessories

New Generation Nano – Same Small Size

Fusion Curing Lights
FUSION Technology
 
FUSION curing light uses patented lens technology enabling the control of LED light pattern into a soliton-like focused beam within a typical composite setting. Intrinsically, LED emits light in a pattern with a divergence of over 120 degrees. The divergence of light significantly weakens the light intensity at the bottom of a box as compared to the top. For  a typical Class II restoration with a depth of 4-6mm, the intensity can drop as much as 80% from the top to bottom layer resulting in less cure, more wear and sensitivity from a completed restoration. Similarly with bonding brackets, which is typically 3-8mm distance away from the light tip. Bracket bonding failures are a direct result of light tolerance over distance and positioning.
Model Description Add to Enquiry List

Uniform Light Distribution

FUSION not only provides a uniform light distribution over composite areas but most importantly overcomes the intensity drop over distance. Consistent high power over spatial map and all distances significantly helps clinicians improve restoration quality and tolerance.

Dummy Image

High Intensity LED

FUSION uses the highest end LED with a full wavelength coverage to enable all composite initiators. It is precision crafted with an aircraft aluminum solid body with drop-proof durability.  It sets a precedent with an amazing amount of technology in a remarkably small and sleek design including an amazing LCD in a light this small with backlit metal keypad and raised buttons for easy activation.

Dummy Image

Tacking Crowns

Snap on tacking tip. Place the tip firmly with pressure on the center of the Cerec crown and tack for 1 second then stop. Wipe excess clean then switch to 9mm cap. Anchor light using the 9mm cap on top of the crown. Full cure for 10 seconds.

Dummy Image

Stands out from the crowd

The most powerful: proven power of 2700 mW/cm2 with minimum dispersion (over 1000mW/cm2 maintained at 8mm distance)
The most uniform beam pattern to ensure uniform composite hardness and minimum stress
The smallest, the most ergonomic and easy to use with its intuitive and advanced interface
Dummy Image

Easy Upgrades

With FUSION, you have the options of upgrading to DOE  to perform soft tissue oral exam and oral cancer screening. Simply purchase the FUSION-DOE Starter Kit

Dummy Image